Weihong control card for engraving machine
Features of the computer engraving machine control system: Full Chinese interface, three-dimensional graphic display, simple operation. C bus plug-in card structure, standard, compatible. Cutting speed. Meter to meter/minute, Spindle speed rpm ~ rpm. Can receive a variety of three-dimensional code formats, or C and other C data formats. It has manual tool setting, automatic tool setting, zero return, automatic zeroing, pause, hard limit, and soft limit functions: with Extensive practicality and ease of use, step, automatic and zero return functions, dynamic display of tracking axis, automatic tool setting, three-axis linked program skip execution (breakpoint memory), rotary axis machining, etc.!
One: One axis or The three axes do not move or move abnormally: the control card is loose or faulty. : The driver of the corresponding axis is faulty. : The corresponding axis stepper motor is faulty. : The corresponding coupling is broken or loose. : The corresponding screw rod is broken or the screw nut is faulty. : The slider of the corresponding axis is faulty. : The driver subdivision and current are different from the settings in the software.
Two: The axis is out of control: the control card is loose or faulty. : Static interference. : Axis motor line failure: Wrong file path: Frequency converter interference: Computer system problems or viruses: Operation errors
Three: Error: Control card is loose or faulty: Drive failure: Stepper motor failure: Static interference: Motor line failure: Data line failure: Wrong path: Coupling is broken or loose: Processing speed is too fast: Computer system problem or virus
Four: Different shades of engraving: Control card is loose or failed: Stepper motor failure : Driver failure or current subdivision is inconsistent with software settings: Axis motor line failure: Spindle motor failure: Frequency converter interference or incorrect data settings: Static interference: Computer virus or system problem
Five: Random engraving: Control card failure : Frequency converter interference: Wrong file path: Static interference: Problems with software settings: Drive failure or incorrect current subdivision settings: Data cable failure: Computer viruses or system problems
Six: The bottom line is unjust: The spindle and The countertop is not vertical. Need to be corrected: There is a problem with the tool: There is a problem with the control card
7: Spindle stalls: Internal short circuit of the spindle: Current shielding: Wrong parameter setting of the frequency converter or its own failure: Control card failure: Short circuit of the spindle line or data line
/> Eight: The spindle rotation sound is abnormal: The frequency converter setting is wrong: The spindle does not rotate: There is something wrong with the spindle itself
Nine: The direction is opposite when walking or returning to the mechanical origin: Change the c. file in Notepad: Modify the frequency conversion Wiring method of the device: The direction of rotation in Weihong software
10: The machine cannot return to the mechanical origin normally: The opposite direction: The control card is faulty or loose: The limit switch or data line is faulty: The driver is faulty: Stepper motor Fault
Eleven: Unable to automatically set the tool: The control card is loose or faulty: The tool setting block line is faulty: There is insulating material on the surface of the tool setting block: Electrostatic interference: Software or computer problem
Twelve: The spindle rotates automatically Or can’t stop
Engraving machine Weihong card/Weihong drive card/Weihong control system card/Engraving machine accessories